16-in 3-blade electronic stand fan (Remote control)

Diameter of the grille	400mm
Power	40W
Product description	3 speed settings;Included a remote controller;7 hours timing shut down;A broad wind coverage;LED display;Safety grid cover;Static and noise-proof motor;High quality fan blades
The battery type	AAA
The battery type	Zn-Mn battery
Product color	White
Fan plate	Three
MEAS	L720*W720*H1200mm
Wire length	1.80m
Voltage	220-240V ~
Frequency	50Hz
Schedule	7h
Wind type	Cool wind
Speed setting	Three
RPM	1 gear1100 r/min;2 gear1200 r/min;3 gear1300 r/min
Powerful airflow	≥120m/min
Applicable standards	VDE
Main Materials	ABS&PP
Certification	CE,RoHS
Weight	2.98kg
Unit package qty	One pc/color box
Outer package qty	One pc/color box

1 Main engine 2 Remote Controller 3 speed settings Weak: enjoy gentle breeze, suitable for babies;Medium: brings comfortable flows and wipes out heatsStrong: produces powerful flows and blows away your worry.The maximum air quantity is 59.32 m³/min Convenient remote control The switch on-and-offr, speed and programmed time are controled by an infrared remote controller.
The maximum distance is 5 meters, so that you can control your fan without nearing it.
7 hours timing shut down Designed with 1-7 hours switch time settings, it will cut off the power when the time limit is up.
A broad wind coverage Ajustable pitch angle, left-and-right oscillation with a degree of 80 for a broad room coverage Rotary expansion vertical bar which can adjust the height of the fan.
Modes of operation shows on the LED display A safety grid cover keeps off fingers.
Stably running, low-noise and long life-span High quality PP fan blades with exquisite work Stable umbrella stand Base Installation Instructions set up 1、 Insert the pole into the base connector, ensure it is installed in place 2、 Insert 4 stands into the base connector.
Ensure the stands are well fixed into the connector.
3、 Loosen the height adjuster and adjust the internal pole to the desired height then fasten the height adjuster.
4、 Loosen the thumb screw at the bottom of the head unit, place the head unit onto the internal pole and tighten the thumb screw Notice 1、 When the fan was assembled, the rotor blade guard shall not be taken off anymore.
2、 Never insert fingers, pencils, or any other object through the grill when fan is running.
3、 Be sure fan is on a stable surface when operating to avoid overturning.
4、 When the appliance is not in use or before cleaning, unplug the appliance from the outlet.
5、 Please wipe the exterior parts with a soft cloth soaking a mild detergent.
6、 Do not use fan near window, rain may cause electrical hazard.
7、 Do not allow water or any other liquid into the motor housing or interior parts.